Product Description
Wind Tunnel Tested Center Louvers for the 2015-2017 Mustang GT, Ecoboost and Base Models.
Nasa ST/TT3-6 Spec. Meets the 3/8" height rule.
Approx 20" wide at the front and 11.5" tall
Designed to be installed in the center of the hood between the OEM side vents. Can be installed with the front aligned with the back of the radiator to retain the 'Pony' stamped on the underside of the hood or installed with the rear edge aligned with the rear edge of the side vents. Unless using our side extractor kit it is recommended the OEM side vents remain unmodified as the front half of the vent hole is forward of the back of the radiator/fan shroud and opening it up may actually reduce performance.
Template PN: RS.12.20.C (must print actual size)
Race Louvers is proud to offer our new Hood and Fender Louvers. These Louvers significantly outperform the competition and are designed for increase front downforce, increase radiator efficiency, cooler engine compartment temperatures and quicker cool down once parked. Each are available in three different levels of performance: RS, RT and the RX.
- 203% more front downforce in maximum downforce configuration than the competition
- 154% more airflow thru the radiator in maximum cooling configuration than the competition
- Maximum zero speed cooling, great for red flag conditions at the track, waiting in impound or making that long slow crawl thru the paddock.
- Less than half the cool down time than the competition
- Powder coated semi gloss black or available bare.
- Includes: Louvers, color matched rivets, template, instructions and decals.
